12dbi external RFID antenna for RFID modules.
The antenna can be installed on steel frame or pillar through its own bracket, and connected with the reader through the coaxial line. The antenna can be installed horizontally or vertically, depending on the installation orientation of the bracket. After installation, the tilt angle of antenna can be adjusted according to the actual situation to obtain the best performance of reading. The antenna can be used outdoor, but it is not suitable to use in acid-base environment.
1. Fix bracket to antenna with quarter US flange nut.
2. Fix the antenna on vertical frame or pillar with M8x125mm screw, washer and screw nut.
|3dB Beam-Width. H-Plan||40°|
|3dB Beam-Width. E-Plan||38°|
|Front to back Ration||≥17dB|
|Max. Input Power.||20W|
|Lightning Protection||DC Grounded|
|Connector Type||N-Type Female|
|Dimensions H*W*D (mm)||445*445(mm)|
|Weight||2.66kg (with mounting bracket)|
|Radiant board material||aluminium|
|Operating Temperature Range||-40ºC/+60ºC|
|Installation mode||Pole mounted|
|Support Pole Diameter||φ30-φ60(mm)|
|Rated Wind Velocity||60m/s|